Data and Tools
-
EPA Method 7471B (SW-846): Mercury in Solid or Semisolid Wastes (Manual Cold-Vapor Technique)
Cold-vapor atomic absorption procedure for determining the concentration of mercury in solid and semisolid wastes.
-
EPA Method 7470A (SW-846): Mercury in Liquid Wastes (Manual Cold-Vapor Technique)
Cold-vapor atomic absorption procedure for determining the concentration of mercury in extracts, aqueous wastes and ground water.
-
EPA Method 8015D (SW-846): Nonhalogenated Organics Using GC/FID
Method 8015D provides procedures for analysis of certain nonhalogenated organic compounds using solvent extraction and direct injection, purge-and-trap gas chromatography.
-
EPA Method 6020B (SW-846): Inductively Coupled Plasma - Mass Spectrometry
SAM lists this method for analysis of solid and wipe samples using ICP-MS to determine metal-containing compounds as the total metal (i.e., total arsenic, osmium, thallium, titanium).
-
EPA Method 6010D (SW-846): Inductively Coupled Plasma - Atomic Emission Spectrometry
SAM lists this method for analysis of solid and wipe samples to determine metal-containing compounds as the total metal (i.e., total arsenic, osmium, titanium, vanadium and thallium).
-
Method 3545A (SW-846): Pressurized Fluid Extraction (PFE)
SAM lists this method for preparation of solid samples to be analyzed for select organic compounds, using pressurized fluid extraction.
-
EPA Method 3520C (SW-846): Continuous Liquid-Liquid Extraction
SAM lists this method for extraction of selected slightly soluble organics from water samples prior to analysis.
-
EPA Method 3015A: Microwave Assisted Acid Digestion of Aqueous Samples and Extracts
SAM lists this method for preparation of non-drinking water samples to be analyzed for total arsenic, thallium, osmium and vanadium.
-
NIOSH Method 9102: Elements on Wipes
Method 9102 describes procedures for analysis of elements in wipe samples using ICP-AES.
-
EPA Method 3535A (SW-846): Solid-Phase Extraction (SPE)
SAM lists this method a procedure to prepare isolating target water samples for analysis of target organic compounds, using solid phase extraction (SPE).
-
EPA Method 3511 (SW-846): Organic Compounds in Water by Microextraction
SAM lists this method for preparation of water samples to be analyzed for tetraethylpyrophosphate (TEPP).
-
EPA Method 3541 (SW-846): Automated Soxhlet Extraction
SAM lists this method for preparation of solid samples to be analyzed for selected organic compounds, using automated Soxhlet extraction.
-
NIOSH Method 6002: Phosphine
Method 6002 describes procedures for analysis of phosphine in air samples, using visible spectrophotometry.
-
Drinking Water State Revolving Fund Program Information for the State of Utah
Federal and State investments for Drinking Water Programs (DWSRF)
-
Summary of the European Union's Regulation for Agricultural Water Reuse
European Commission (Federal Regulation) | Source water: Treated municipal wastewater | End use: Water Reuse for Agriculture
-
Summary of Florida's Water Reuse Guideline or Regulation for Agriculture
Florida (State Regulation) | Source water: Treated municipal wastewater | End use: Agriculture
-
Summary of District of Columbia’s Water Reuse Guideline or Regulation for Landscaping and Onsite Non-potable Water Reuse
District of Columbia (State Regulation) | Source water: Onsite Collected Waters | End use: Landscaping and Onsite Non-Potable Water Reuse
-
Summary of Colorado's Water Reuse Guideline or Regulation for Potable Water Reuse
Colorado (State Regulation) | Source water: Treated municipal wastewater | End use: Potable water reuse
-
Electronic Reporting Tool (ERT) Tips and Frequently Asked Questions
This page provides information about how the ERT program, installation, guides, templates and training.
-
Follow-Up Monitoring Data from Gold King Mine Incident
Monitoring Data from Gold King Mine Response