Laws & Regulations
-
In-Use Testing Template for Large Nonroad Spark-Ignition (SI) Engine
Use this template to report for large nonroad spark-ignition engines.
-
Large Nonroad Spark-Ignition Engines (>19 kiloWatts): Family Naming Conventions
How to create Positions 5-12 of your Engine Family name for Large Nonroad Spark-Ignition Engines (>19 kiloWatts).
-
Complete Heavy-Duty Highway Vehicles (8,500 to 14,000 Pounds GVWR; Tested on Chassis Dynamometer): Family Naming Conventions
How to create Positions 5-12 of your Engine Family name for Complete Heavy-Duty Highway Vehicles (8,500 to 14,000 pounds GVWR; tested on chassis dynamometer).
-
Presentation on Onroad Electric Motorcycle and Portable Fuel Container for Engines and Vehicles Compliance Information System (EV-CIS), formerly Verify, Module Deployment
This presentation provides information about electric motorcycles and portable fuel container EV-CIS module deployment.
-
Heavy-Duty Evaporative Families: Family Naming Conventions
How to create Positions 5-12 of your Engine Family name for Heavy-Duty Evaporative Families.
-
California-Only Medium-Duty Vehicles: Family Naming Conventions
How to create Positions 5-12 of your engine family name for California-Only Medium-Duty Vehicles.
-
Frequent Questions on EPA Greenhouse Gas (GHG) Provisions for Vehicle and Engine Conversions to be Used on Clean Alternative Fuel
View frequent questions on EPA GHG provisions for conversions of vehicles and engines for clean alternative fuel.
-
Webinar on Vehicle and Engine Conversions for Clean Alternative Fuel
EPA presented a webinar on the Clean Alternative Fuel Vehicle and Engine Conversions Final Rule on April 27, 2011.
-
Materials for CROMERR and Engines and Vehicles Compliance Information System's (EV-CIS), formerly Verify, Request for Certificate (RFC) Module for Light-Duty Vehicle and Truck Manufacturers
Presented in September 2015 to light-duty manufacturers.
-
Proposed Rule and Related Materials for Control of Air Pollution from New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
This page includes a summary of EPA’s proposed rule that would set new, more stringent standards to reduce pollution from heavy-duty vehicles and engines starting in model year (MY) 2027.
-
Job Aids for Biointermediates Registration
Biointermediates job aids are designed to provide an overview of tasks that will enable users to utilize the recently redesigned OTAQREG system.
-
40 CFR part 80 and 40 CFR part 1090 Pending Registration List
This page provides transparency into the process a registration request must undergo before it is activated by EPA.
-
Safe Drinking Water Act Section 1441
This page will provide information for water and wastewater utilities to apply for a certification of need under Section 1441 of the Safe Drinking Water Act.
-
Reducing Your Child's Exposure To Flame Retardant Chemicals
This document provides information to help parents reduce their children’s exposure to flame retardant chemicals.
-
Subpart ZZ - Ceramics Manufacturing
Details GHGRP rulemaking actions affecting Subpart ZZ of the program and provides links to relevant fact sheets, rulemaking documents, and other supporting materials.
-
When testing a work area, does one lead test kit or paint chip sample suffice for any single component?
The certified renovator is only required to use one lead test kit or paint chip sample for each component, even if the surface of the component is extensive (e.g., a large wall). Question Number: 23002-23865 Find a printable PDF copy of all frequent questions pertaining to lead.
-
The lead information pamphlet titled "Renovate Right" states there is a kit consumers can use to collect samples to send to a lab if they suspect any lead hazards have been left after a renovation. Do samples like these need to be taken by certified abatement personnel or a dust sampling technician?
No. When all the work is finished, you may want to know if your home, child care facility, or school has been cleaned up properly. One way to check is a lead-dust test. Lead-dust tests are wipe samples sent to a laboratory for analysis. You have the choice of having…
-
Is lead paint testing required under the Lead Renovation, Repair and Painting (RRP) Rule?
No. A firm can either assume lead-based paint is present and follow the requirements of the RRP Rule (which requires no testing), or test and if lead-based paint is found follow the requirements of the regulation. Question Number: 23002-32338 Find a printable PDF copy of all frequent questions pertaining to…
-
Do test results from a certified renovator using an EPA-recognized lead test kit (40 CFR § 745.83) or performing paint chip sampling (40 CFR § 745.82) become an official part of the lead-based paint testing record for that house thus negating the need for a certified lead inspector or certified lead risk assessor to conduct the inspection in that area of the house? Can a certified renovator conduct a complete lead-based paint inspection and give the property owner as an inspection report?
Answer: The results of paint testing using lead test kits or paint chip sampling are part of the official lead-based paint testing record for a home, and must be disclosed under EPA's Real Estate Disclosure regulation (40 CFR part 745, subpart F). However, EPA's regulations only provide for a certified…
-
Does the Lead Renovation, Repair and Painting (RRP) Rule apply to work on windows that have been installed within the last 20 years in a pre-1978 housing unit?
The RRP Rule applies unless you have determined that all the components affected by the renovation, including the windows, are free of paint or other surface coatings that contain lead equal to or in excess of 1.0 milligrams per square centimeter (mg/cm 2) or 0.5% by weight. This determination must…