SAF-RON GOLD
TECHNICAL PRODUCT BULLETIN #D-12
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
ORIGINAL LISTING DATE: JANUARY 3, 2005
REVISED LISTING DATE:
"SAF-RON GOLD"
(a/k/a SF-GOLD DISPERSANT)
LISTING CHANGES PENDING, FOLLOWING VERIFICATION BY MANUFACTURER AND EPA
| I. NAME, BRAND, OR TRADEMARK |
|---|
| SAF-RON GOLD Type of Product: Dispersant |
| II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
|---|
| Sustainable Environmental Technologies, Inc. 55 Ivan Allen Jr. Boulevard, Suite 850 Atlanta, GA 30308 Customer Service: Phone: (404) 946-3585 24-hour Emergency Number: Phone: (281) 845-9919 E-mail: support@sustainable-corp.com / bruce@sustainable-corp.com Website: www.become-sustainable.com Exit/ www.saf-ron.com Exit (Mr. Bruce Richards) |
| III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
|---|
| Sustainable Environmental Technologies, Inc. 55 Ivan Allen Jr. Boulevard, Suite 850 Atlanta, GA 30308 Customer Service: Phone: (404) 946-3585 24-hour Emergency Number: Phone: (281) 845-9919 E-mail: support@sustainable-corp.com / bruce@sustainable-corp.com Website: www.become-sustainable.com Exit/www.saf-ron.com Exit (Mr. Bruce Richards) |
| IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
|---|
| 1. Flammability: Non-flammable. 2. Ventilation: Special ventilation is not required. 3. Skin and eye contact; protective clothing; treatment in case of contact: No special equipment required; however, goggles are recommended. Skin contact - if irritation occurs flush with water; seek medical attention if irritation persists. Eye contact - flush with plenty of water; seek medical attention if irritation persists. 4.a. Maximum storage temperature: 120ºF 4.b. Minimum storage temperature: 32ºF 4.c. Optimum storage temperature range: 40 - 120ºF 4.d. Temperatures of phase separations and chemical changes: NA |
| V. SHELF LIFE |
|---|
| The shelf life is unlimited in unopened containers. |
| VI. RECOMMENDED APPLICATION PROCEDURE |
|---|
| 1. Application Method: Sprayer, Boat, Aircraft 2. Concentration/Application Rate: A dispersant to oil ratio ranging from 1:50 to 1:10 is recommended. For heavy high viscosity oils - 8 gallons of SAF-RON GOLD will disperse approximately 70 gallons of crude oil or bunker C. Also for use with heavy high viscosity oils, SAF-RON GOLD can be used as a concentrate or diluted at a dispersant to water ratio of 1:10. For lighter oils, SAF-RON GOLD can be diluted at mixtures of 1:20 to 1:100. A recommended dispersant to water ratio of 1:40 can be used for most spills. Ratios are dependent upon type of oil and weather conditions. 3. Conditions for Use: Any applicable condition determined by authorities for dispersant use |
| VII. TOXICITY AND EFFECTIVENESS | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a. Toxicity:
b. Effectiveness: SWIRLING FLASK DISPERSANT EFFECTIVENESS TEST WITH SOUTH LOUISIANA (S/L) AND PRUDHOE BAY (P/B) CRUDE OILS VENDOR LAB REPORT:
|
| VIII. MICROBIOLOGICAL ANALYSIS |
|---|
| NA |
| IX. PHYSICAL PROPERTIES |
|---|
| 1. Flash Point, ASTM Method D-56: >100ºC 2. Pour Point, ASTM Method D-97: -2.5ºC 3. Viscosity @40ºC, ASTM Method D-445: 1.42 cSt 4. Specific Gravity @60ºF/60ºF, ASTM Method D-287: 1.014 5. pH: 8.8 6. Surface Active Agents: Proprietary blend of surface-active agents. 7. Solvents: None. 8. Additives: None. 9. Solubility: Fully water soluble. |
| X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|