DaimlerChrysler Corporation - Toledo Supplier Park - Permitting Information
1. Facility Information
DaimlerChrysler Corporation - Toledo Supplier Park
2. Location
4000 Stickney Avenue, Toledo, Ohio
3. Distance from US/Canada Border
25 miles
4. Facility Type and Size
Automobile assembly plant with an annual production capacity of 200,064 vehicles.
5. Sources of Emissions
Primary emissions result from the application of color and protective coatings to the vehicle, and the miscellaneous combustion of natural gas for process and comfort heating.
6. Type of Fuel
Natural gas will fuel all combustion processes with #2 fuel oil as stand by for the main boilers.
7. Type and Quantity of Emissions
This project, if approved, will result in permit allowable emissions for the new sources as defined in the following table. Because this project also includes the shutdown of existing sources, net reductions in criteria pollutants are expected. Decreases in emissions of volatile organic compounds (VOC) and nitrogen oxides (NOx) that offset and exceed the amount of the new source emissions, are required as part of this permit. The proposed allowable criteria pollutant air emission rates for the new sources and the net increase or decrease associated with this project are as follows:
| Pollutant | Permit Allowable (Tons/Year) |
Shutdown Decreases (Tons/Year) |
Project Net Increases (Decreases) (Tons/Year) |
|---|---|---|---|
| VOC | 676.35 | 743.99 | (67.64) |
| NOx | 64.48 | 70.93 | (6.45) |
| Particulate | 69.53 | * | * |
| PM10 | 51.28 | * | * |
| CO | 61.26 | * | * |
| SO2 | 27.22 | * | * |
* Additional reductions occurred for these pollutants but were not calculated because offsets are not required for these pollutants.
8. Emission Control Technology
Individual emissions units are restricted by a combination of BACT and LAER limitations including: production restrictions, coating organic compound content limitations, thermal oxidation, particulate filtration and proper work practices.
9. Date Permit Application Received
March 16, 2004
10. Stack Height and Diameter
Multiple stacks and fugitive emissions sources prevent an accurate representation of this function. The tallest stack is 51.48 m.
11. Permit Agency Contact
Robert Kossow
Toledo Division of Environmental Services
348 South Erie Street
Toledo, Ohio 43614
419-936-3941