NALE-IT. National Contingency Plan Product Bulletin
TECHNICAL Product Bulletin #SW-28
Listing date: NOVEMBER 05, 2001
"NALE-IT"
| I. Name, brand, or trademark |
|---|
| NALE-IT Type of Product: Surface Washing Agent |
| II. Name, address, and telephone number of manufacturer/contact |
|---|
| SPL Control LLC P.O. Box 627 Elmore City, OK 73433 Phone: (580) 788-2187 Email: splcontorl@aol.com (Mr. Tom Luster) |
| III. Name, address, and telephone number of primary distributors |
|---|
| SPL Control LLC P.O. Box 627 Elmore City, OK 73433 Phone: (580) 788-2187 Email: splcontorl@aol.com (Mr. Tom Luster) |
| IV. Special handling and worker precautions for storage and field application |
|---|
| 1. Flammability: Non-flammable 2. Ventilation: Workers should be in well ventilated areas; if in a confined area, use a respirator. 3. Skin and eye contact; protective clothing; treatment in case of contact: Workers should wear protective goggles or safety glasses. Prolonged contact with skin may result in dryness. 4.a. Maximum storage temperature: NA 4.b. Minimum storage temperature: >32ºF 4.c. Optimum storage temperature range : 40ºF to 200ºF 4.d. Temperatures of phase separations and chemical changes: No phase separation or hazardous polymerization will occur. |
| V. Shelf life |
|---|
| Indefinite. |
| VI. Recommended application procedure |
|---|
| 1. Application Method: NALE-IT may be applied using a pressure sprayer. 2. Concentration/Application Rate: For pit closures, surface hydrocarbon spills, compressor stations, pipeline and flow line leaks, well head and tank farm leaks, and highway spills (petroleum products) mix 1 part NALE-IT with 20 parts water. 3. Conditions for Use: Equally effective with fresh or salt water. |
| VII. Toxicity and effectiveness | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a. Toxicity:
|
| VIII. Microbiological analysis |
|---|
| NA |
| IX. Physical properties |
|---|
| 1. Flash Point: >212ºF 2. Pour Point: 30ºF 3. Viscosity: 1.18 4. Specific Gravity: 1.02 5. pH: 6.8 - 7.2 6. Surface Active Agents: CONFIDENTIAL 7. Solvents: None 8. Additives: CONFIDENTIAL 9. Solubility in water: Soluble in fresh and salt water |
| X. Analysis for heavy metals, cyanides, and chlorinated hydrocarbons | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|