OSR-10. National Contingency Plan Product Bulletin

Technical Product Bulletin #SW-59
Original listing date: JUNE 28, 2011
"OSR-10"
LAST COMMUNICATION WITH MANUFACTURER: 09/27/2012
LAST ATTEMPT: 8/11/2021

I. Name, brand, or trademark
OSR-10 Type of Product: Surface Washing Agent

II. Name, address, and telephone number of manufacturer/CONTACT
MAG7 Venture Group, LLC DBA MAG7 Technologies 1 Lepage Place, Suite 100 Syracuse, NY 13206 Phone: Updated information required Fax: Updated information required E-mail: Updated information required (Mr. Greg Goodell or Mr. Trevor Quig)

III. Name, address, and telephone number of primary distributors
MAG7 Venture Group, LLC DBA MAG7 Technologies 1 Lepage Place, Suite 100 Syracuse, NY 13206 Phone: Updated information required Fax: Updated information required E-mail: Updated information required (Mr. Greg Goodell or Mr. Trevor Quig)

IV. Special handling and worker precautions for storage and field application
1. Flammability: Non-flammable 2. Ventilation: Move subject to fresh air. If breathing is difficult, obtain medical help. 3. Skin and eye contact; protective clothing; treatment in case of contact: Wash affected skin area with water. Consult physician of irritation persists. Skin irritation will not occur with most users. Flush eyes with a large amount of water for at least 15 minutes. Consult physician if irritation persists. Wear safety glasses and neoprene or rubber gloves during application. 4.a. Maximum storage temperature: 120°F 4.b. Minimum storage temperature: 35°F 4.c. Optimum storage temperature range: 40°F to 120°F 4.d. Temperatures of phase separations and chemical changes: NA. Phase separation will not occur within the storage range. Product should be stored out of direct sunlight unless it is in an Ultraviolet (UV) light resistant container.

IV. Special handling and worker precautions for storage and field application

1. Flammability: Non-flammable
2. Ventilation: Move subject to fresh air. If breathing is difficult, obtain medical help.
3. Skin and eye contact; protective clothing; treatment in case of contact: Wash affected skin area with water. Consult physician of irritation persists. Skin irritation will not occur with most users. Flush eyes with a large amount of water for at least 15 minutes. Consult physician if irritation persists. Wear safety glasses and neoprene or rubber gloves during application.
4.a. Maximum storage temperature: 120°F
4.b. Minimum storage temperature: 35°F
4.c. Optimum storage temperature range: 40°F to 120°F
4.d. Temperatures of phase separations and chemical changes: NA. Phase separation will not occur within the storage range. Product should be stored out of direct sunlight unless it is in an Ultraviolet (UV) light resistant container.

V. Shelf life
2 years in a sealed (unopened) container (tote, drum, pail) as delivered. 1 year in an opened container).

VI. Recommended application procedure

1. Application Method: Apply OSR-10 to oil or contaminant with sprayer, pressure washer, mop, sponge, or brush. Application times will depend on the level of contaminant with a minimum of 10 minutes recommended soak time. The required soak time to remove oil will vary with oil density and degree of weathering. OSR-10 separates the oil from the physical surface to allow the oil to be sprayed off with a water rinse. OSR-10 should be mixed into soil applications and agitated to increase the effectiveness and reduce the application time.

2. Concentration/Application Rate: Dilution ratios for most applications range from 2 to 1 (parts water to parts OSR-10) to 15 to 1 (parts water to parts OSR-10). Dilution ratios are dependent on the contamination level and application with heavier crude oil spills requiring a lower dilution ratio. Rinse with water after usage for residue free surface. Surface cleaning typically requires 5 to 1 or 10 to 1 dilution ratio. These dilution ratios will require 1 gallon of OSR-10 per 300 square feet of surface area. These dilution ratios can be used in many applications including shorelines, rocks, and beaches.

3. Conditions for Use: Salt or fresh water (temperature ranges from 35°F to 120°F). Oil or contaminant can be skimmed from the water or rinsed and captured into collection containers and disposed of per local, state, and federal regulations.

Dilution	Intended Use
2:1 5:1 to 10:1 15:1 to 30:1	Heavy/severe contamination such as oil spills Moderate contamination Light contamination

VII.Toxicity and effectiveness

a. Toxicity:

Material Tested	Species	LC50 (ppm)
OSR-10	Menidia beryllina Mysidopsis bahia	385.00 96-hr 399.00 48-hr
No. 2 Fuel Oil	Menidia beryllina Mysidopsis bahia	26.30 96-hr 4.86 48-hr
OSR-10 & No. 2 Fuel Oil (1:10)	Menidia beryllina Mysidopsis bahia	16.00 96-hr 4.77 48-hr
Reference Toxicant (SDS)	Menidia beryllina Mysidopsis bahia	2.23 96-hr 7.93 48-hr

b. Effectiveness:
NA

VIII. Microbiological analysis
NA

IX. Physical properties
1. Flash Point: 143°F 2. Pour Point: 20°F 3. Viscosity: 37 SUS @60°F 4. Specific Gravity: 1.1672 @60°F 5. pH: 11.5 6. Surface Active Agents: CONFIDENTIAL 7. Solvents: CONFIDENTIAL 8. Additives: CONFIDENTIAL 9. Solubility: Complete in water

X. Analysis for heavy metals, cyanide, and chlorinated hydrocarbons

Compound	Concentration (ppm)
Arsenic	ND
Cadmium	ND
Chromium	0.209
Copper	0.150
Lead	7.57
Mercury	6.8 (ppb)
Nickel	1.20
Zinc	ND
Cyanide	ND
Chlorinated Hydrocarbons	ND

OSR-10. National Contingency Plan Product Bulletin

Emergency Response