Introduction to Pesticide Drift
Pesticide spray drift is the movement of pesticide dust or droplets through the air at the time of application or soon after, to any site other than the area intended. Pesticide droplets are produced by spray nozzles used in application equipment for spraying pesticides on crops, forests, turf and home gardens. Some other pesticides are formulated as very fine dry particles (commonly referred to as dust formulations).
Effects of Pesticide Drift
Pesticide drift of sprays and dusts can affect people’s health and the environment, and damage nearby crops.
Health and Environmental Risks
Pesticide drift can pose health risks when sprays and dusts are carried by the wind and deposited on other areas:
- Nearby homes, schools, and playgrounds.
- Farm workers in adjacent fields.
- Wildlife, plants, and streams and other water bodies.
Pesticide drift can cause economic loss:
- Up to seventy million pounds of pesticide active ingredients are wasted to drift per year.
- One to ten percent of agricultural pesticide sprays drift from the target crop.
- Drift of herbicides can injure some crops. Crops on nearby farms can be unsellable if the drifting pesticide is not registered for use on the crop.
- State and local agencies receive thousands of complaints about drifting pesticides each year and spend substantial resources investigating drift complaints.
Actions for Consumers to Reduce Spray Drift and Runoff from Pesticide Product Applications
When applying pesticides around your home, follow these good stewardship practices to protect water resources by reducing runoff and spray drift.
- Only apply the pesticide directly to the treatment area.
- Be mindful of the location of storm drains, drainage ditches, gutters, or surface waters during a pesticide application. Apply the pesticide in a manner that does not allow the product to enter these areas.
- Applying pesticides during calm weather conditions, when rain is not predicted for the next 24 hours, will help to ensure that wind or rain does not blow or wash pesticide off the treatment area.
- Rinsing application equipment, such as watering cans, low pressure hand wands, backpack sprayers, etc. over the treated area will help avoid runoff to water bodies or drainage systems.
- When applying granular products, sweeping any product that lands on a driveway, sidewalk, street, or other hard impervious surface, back onto the treated area of the lawn or garden will help to prevent runoff to water bodies or drainage systems.
- When watering treated areas, refer to the watering-in instructions on the label, and ensure you do not water the treated area to the point of runoff.