Skip to main content
U.S. flag

An official website of the United States government

Here’s how you know

Dot gov

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

HTTPS

Secure .gov websites use HTTPS
A lock (LockA locked padlock) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

    • Environmental Topics
    • Air
    • Bed Bugs
    • Cancer
    • Chemicals, Toxics, and Pesticide
    • Emergency Response
    • Environmental Information by Location
    • Health
    • Land, Waste, and Cleanup
    • Lead
    • Mold
    • Radon
    • Research
    • Science Topics
    • Water Topics
    • A-Z Topic Index
    • Laws & Regulations
    • By Business Sector
    • By Topic
    • Compliance
    • Enforcement
    • Laws and Executive Orders
    • Regulations
    • Report a Violation
    • Environmental Violations
    • Fraud, Waste or Abuse
    • About EPA
    • Our Mission and What We Do
    • Headquarters Offices
    • Regional Offices
    • Labs and Research Centers
    • Planning, Budget, and Results
    • Organization Chart
    • EPA History

Breadcrumb

  1. Home
  2. Underground Injection Control (UIC)

Class I Industrial and Municipal Waste Disposal Wells

On this page:

  • Use of Class I wells
  • Hazardous waste disposal wells
  • Non-hazardous industrial waste disposal wells
  • Municipal wastewater disposal wells
  • Radioactive waste disposal wells
  • Protecting drinking water resources
  • Additional information

Use of Class I wells

Class I wells are used to inject hazardous and non-hazardous wastes into deep, confined rock formations.  Class I wells are typically drilled thousands of feet below the lowermost underground source of drinking water (USDW). Approximately 800 operational Class I wells exist in the United States. The geologies of the Gulf Coast and the Great Lakes areas are best suited for these types of wells. Most Class I wells are found in there.

Examples of industries that use Class I wells include:

  • Petroleum refining
  • Metal production
  • Chemical production
  • Pharmaceutical production
  • Commercial disposal
  • Food production
  • Municipal wastewater treatment

Based upon the characteristics of the fluids injected, Class I wells fall into one of four subcategories.

  • Hazardous waste disposal wells
  • Non-hazardous industrial waste disposal wells
  • Municipal wastewater disposal wells
  • Radioactive waste disposal wells

Hazardous waste disposal wells

Industry injects hazardous waste through Class I wells, as defined by the Resource Conservation and Recovery Act (RCRA). Class I wells are strictly regulated under RCRA and the Safe Drinking Water Act (SDWA). Construction, permitting, operating, and monitoring requirements are more stringent for Class I hazardous waste disposal wells than for other Class I injection well categories.

Approximately 17 percent of Class I wells are hazardous waste disposal wells. Most Class I hazardous waste wells are located at industrial facilities and dispose of waste generated onsite. These wells are operated in 10 states with the majority in Texas and Louisiana. Only a few commercial Class I wells accept hazardous waste generated offsite.  

The Hazardous and Solid Waste Amendments (HSWA) to the RCRA added significant restrictions on the disposal of hazardous waste. Under these amendments, land disposal of hazardous wastes, which includes Class I hazardous waste injection wells, is prohibited unless the:

  • Waste has been treated to become non-hazardous or;
  • Disposer can demonstrate that the waste will remain where it has been placed for as long as it remains hazardous, which has been defined as 10,000 years by regulation.

Learn more about the impact of the RCRA land disposal restrictions on Class I hazardous waste injection wells.

In 2001, EPA published “Class I Underground Injection Control Program: Study of the Risks Associated with Class I Underground Injection Wells.”  The report:

  • Synthesizes existing information on the Class I program 
  • Documents studies of the risks to human health or the environment posed by Class I injection wells

Review EPA's study, Class I Underground Injection Control Program: Study of the Risks Associated with Class I Underground Injection Wells.


Non-hazardous industrial waste disposal wells

Approximately 53 percent of Class I wells provide for injection of non-hazardous industrial waste.

Disposal of non-hazardous industrial waste occurs at injection wells operating in 19 states. The majority of these wells are in Texas, California, Louisiana, Kansas, and Wyoming.


Municipal wastewater disposal wells

Approximately 30 percent of Class I wells are municipal wastewater disposal wells. These wells are located exclusively in Florida. 


Radioactive waste disposal wells

This sub-class of well may be used to inject waste that contains radioactive material.  No known radioactive waste disposal wells operating in the United States.


Protecting drinking water resources

Class I wells allow injection far below the lowermost USDW. Injection zones typically range from 1,700 to more than 10,000 feet in depth. The injection zone is below and separated from USDWs by an impermeable “cap” rock called the confining layer. The confining layer may be associated with additional layers of permeable and impermeable rock and sediment to separate the injection zone from the USDW.

Every Class I well operates under a permit. Each permit is valid for up to 10 years. Owners and operators of Class I wells must meet specific requirements to obtain a permit. These requirements address the siting, construction, operation, monitoring and testing, reporting and record keeping, and closure of Class I wells.

  • Read a detailed summary of requirements for all Class I wells and Class I hazardous waste wells.

Additional information

  • Visit the regulations page to read more about the requirements for owners and operators of Class I wells.

UIC Class I well cross-sectional drawing

Class I wells are used to inject hazardous and non- hazardous waste into formations below underground sources of drinking water, typically at depths thousands of feet below the surface.

Underground Injection Control (UIC)

  • Class I Industrial and Municipal Waste Disposal Wells
  • Class II Oil and Gas Related Injection Wells
  • Class III Injection Wells for Solution Mining
  • Class IV Shallow Hazardous and Radioactive Injection Wells
  • Class V Wells for Injection of Non-Hazardous Fluids into or Above Underground Sources of Drinking Water
  • Class VI Wells Used for Geologic Sequestration of CO2
Contact Us About Underground Injection Control
Contact Us to ask a question, provide feedback, or report a problem.
Last updated on March 12, 2025
  • Assistance
  • Spanish
  • Arabic
  • Chinese (simplified)
  • Chinese (traditional)
  • French
  • Haitian Creole
  • Korean
  • Portuguese
  • Russian
  • Tagalog
  • Vietnamese
United States Environmental Protection Agency

Discover.

  • Accessibility Statement
  • Budget & Performance
  • Contracting
  • EPA www Web Snapshot
  • Grants
  • No FEAR Act Data
  • Plain Writing
  • Privacy
  • Privacy and Security Notice

Connect.

  • Data
  • Inspector General
  • Jobs
  • Newsroom
  • Regulations.gov
  • Subscribe
  • USA.gov
  • White House

Ask.

  • Contact EPA
  • EPA Disclaimers
  • Hotlines
  • FOIA Requests
  • Frequent Questions
  • Site Feedback

Follow.