An official website of the United States government.

We've made some changes to EPA.gov. If the information you are looking for is not here, you may be able to find it on the EPA Web Archive or the January 19, 2017 Web Snapshot.

Climate Change Adaptation Resource Center (ARC-X)

Climate Impacts on Water Utilities

The adaptation strategies provided below are intended to inform and assist communities in identifying potential alternatives. They are illustrative and are presented to help communities consider possible ways to address anticipated current and future climate threats to contaminated site management.

On this page:
Case study available = Case Study available
 

Climate Impacts

 

Drought

  • Construct New InfrastructureCase study available
    • Build infrastructure needed for aquifer storage and recovery
      Increasing the amount of groundwater storage available promotes recharge when surface water flows are in excess of demand, thus increasing climate resilience for seasonal or extended periods of drought, and taking advantage of seasonal variations in surface water runoff. Depending on whether natural or artificial aquifer recharge is employed, the required infrastructure may include percolation basins and injection wells.
    • Diversify options for water supply and expand current sources
      Diversifying sources helps to reduce the risk that water supply will fall below water demand. Examples of diversified source water portfolios include using a varying mix of surface water and groundwater, employing desalination when the need arises and establishing water trading with other utilities in times of water shortages or service disruption.
    • Increase water storage capacity
      Increased drought can reduce the safe yield of reservoirs. To reduce this risk, increases in available storage can be made. Methods for accomplishing this may include raising a dam, practicing aquifer storage and recovery, removing accumulated sediment in reservoirs or lowering water intake elevation.
    • Install low-head dam for saltwater wedge and freshwater pool separation
      Rising sea levels, combined with reductions in freshwater runoff due to drought, will cause the salt water-freshwater boundary to move further upstream in tidal estuaries. Upstream shifts of this boundary can reduce the water quality of surface water resources. Installation of low-head dams across tidal estuaries can prevent this upstream movement.
  • Increase System EfficiencyCase study available
    • Finance and facilitate systems to recycle water
      Recycling greywater frees up more finished water for other uses, expanding supply and decreasing the need to discharge into receiving waters. Receiving water quality limitations may increase due to more frequent droughts. Therefore, to limit wastewater discharges, use of reclaimed water in homes and businesses should be encouraged.
    • Practice conjunctive use
      Conjunctive use involves the coordinated, optimal use of both surface water and groundwater, both intra- and inter-annually. Aquifer storage and recovery is a form of conjunctive use. For example, a utility may store some fraction of surface water flows in aquifers during wet years and withdraw this water during dry years when the river flow is low. Depending on whether natural or artificial aquifer recharge is employed, the required infrastructure may include percolation basins and injection wells.
  • Model Climate RiskCase study available
    • Develop models to understand potential water quality changes
      In many areas, increased water temperatures will cause eutrophication and excess algal growth, which will reduce drinking water quality. The quality of drinking water sources may also be compromised by increased sediment or nutrient inputs due to extreme storm events. These impacts may be addressed with targeted watershed management plans.
    • Model and monitor groundwater conditions
      Understanding and modeling groundwater conditions will inform aquifer management and projected water quantity and quality changes. Monitoring data for aquifer water level, changes in chemistry and detection of saltwater intrusion can be incorporated into models to predict future supply. Climate change may lead to diminished groundwater recharge in some areas because of reduced precipitation and decreased runoff.
  • Modify Land Use
    • Implement watershed management
      Watershed management includes a range of policy and technical measures. These generally focus on preserving or restoring vegetated land cover in a watershed and managing stormwater runoff. These changes help mimic natural watershed hydrology, increasing groundwater recharge, reducing runoff and improving the quality of runoff.
  • Modify Water Demand
    • Encourage and support practices to reduce water use at local power plants
      The electricity sector, when compared with other sectors, withdraws the greatest amount of water in the United States. Any efforts to reduce water usage by utilities will increase available water supply. For example, utilities may provide reclaimed water to electric utilities for electricity generation, use closed-loop water circulation systems, or use dry cooling for the turbines.
    • Model and reduce agricultural and irrigation water demand
      Agriculture represents the second largest user of water in the United States in terms of withdrawals. In order to forecast and plan for future water supply needs, agricultural (irrigation) demand must be projected, particularly in drought-prone areas. For example, to reduce agricultural water demand, utilities can work with farmers to adopt advanced micro-irrigation technology (e.g., drip irrigation).
    • Model future regional electricity demand
      The electricity sector represents the largest user of water in the United States in terms of withdrawals. In order to forecast future water supply needs, changes in electricity demand related to climate change must be projected.
    • Practice water conservation and demand management
      An effective and low-cost method of meeting increased water supply needs is to implement water conservation programs that will cut down on waste and inefficiencies. Public outreach is an essential component of any water conservation program. Outreach communications typically include: basic information on household water usage, the best time of day to undertake water-intensive activities and information on and access to water efficient household appliances such as low-flow toilets, showerheads and front-loading washers. Education and outreach can also be targeted to different sectors (i.e., commercial, institutional, industrial, public sectors). Effective conservation programs in the community include those that provide rebates or help install water meters, water-conserving appliances, toilets and rainwater harvesting tanks.
  • Monitor Operational CapabilitiesCase study available
    • Monitor surface water conditions
      Understanding surface water conditions and the factors that alter quantity and quality is an important part of projecting how climate change may impact water resources. Monitoring data for discharge, snowmelt, reservoir or stream level, upstream runoff, streamflow, in-stream temperature and overall water quality can be incorporated into models of projected supply or receiving water quality.
  • Plan for Climate ChangeCase study available
    • Develop emergency response plans
      Emergency response plans (ERPs) outline activities and procedures for utilities to follow in case of an incident, from preparation to recovery. Some of the extreme events considered in ERPs may change in their frequency or magnitude due to changes in climate, which may require making changes to these plans to capture a wider range of possible events.
    • Update drought contingency plans
      Drought leads to severe pressures on water supply. Drought contingency plans would include the use of alternate water supplies and the adoption of water use restrictions for households, businesses and other water users. These plans should be updated regularly to remain consistent with current operations and assets.
  • Repair and Retrofit FacilitiesCase study available
    • Implement saltwater intrusion barriers and aquifer recharge
      As sea level rises, saltwater may intrude into coastal aquifers, resulting in substantially higher treatment costs. The injection of fresh water into aquifers can help to act as a barrier, while intrusion recharges groundwater resources.
    • Retrofit intakes to accommodate lower flow or water levels
      In areas where streamflow declines due to climate change, water levels may fall below intakes for water treatment plants.

Storms and Flooding

  • Construct New InfrastructureCase study available
    • Build flood barriers to protect infrastructure
      Flood barriers to protect critical infrastructure include levees, dikes and seawalls. A related strategy is flood proofing, which involves elevating critical equipment or placing it within waterproof containers or foundation systems.
    • Plan and establish alternative or on-site power supply
      Water utilities are one of the major consumers of electricity in the United States. With future electricity demand forecasted to grow, localized energy shortages may occur. The development of "off-grid" sources can be a good hedging strategy for electricity shortfalls. Moreover, redundant power supply can provide resiliency for situations in which natural disasters cause power outages. On-site sources can include solar, wind, inline microturbines and biogas (i.e., methane from wastewater treatment). New and back-up electrical equipment should be located above potential flood levels.
    • Relocate facilities to higher elevations
      Relocating utility infrastructure, such as treatment plants and pump stations, to higher elevations would reduce risks from coastal flooding and exposure as a result of coastal erosion or wetland loss.
  • Model Climate RiskCase study available
    • Conduct extreme precipitation events analyses
      An increase in the magnitude or frequency of extreme events can severely challenge water utility systems that were not designed to withstand intense events. Extreme event analyses or modeling can help develop a better understanding of the risks and consequences associated with these types of events.
    • Develop models to understand potential water quality changes
      In many areas, increased water temperatures will cause eutrophication and excess algal growth, which will reduce drinking water quality. The quality of drinking water sources may also be compromised by increased sediment or nutrient inputs due to extreme storm events. These impacts may be addressed with targeted watershed management plans.
    • Model and monitor groundwater conditions
      Understanding and modeling groundwater conditions will inform aquifer management and projected water quantity and quality changes. Monitoring data for aquifer water level, changes in chemistry and detection of saltwater intrusion can be incorporated into models to predict future supply. Climate change may lead to diminished groundwater recharge in some areas because of reduced precipitation and decreased runoff.
    • Model and reduce inflow/infiltration in the sewer system
      More extreme storm events will increase the amount of wet weather infiltration and inflow into sanitary and combined sewers. Sewer models can estimate the impact of those increased wet weather flows on wastewater collection system and treatment plant capacity and operations. Potential system modifications to reduce those impacts include infiltration reduction measures, additional collection system capacity, offline storage or additional peak wet weather treatment capacity.
  • Modify Land UseCase study available
    • Acquire and manage ecosystems
      Intact natural ecosystems have many benefits for utilities: reducing sediment and nutrient inputs into source water bodies, regulating runoff and streamflow, buffering against flooding and reducing storm surge impacts and inundation on the coasts (e.g., mangroves, saltwater marshes, wetlands). Utilities can also work with regional floodplain managers and appropriate stakeholders to explore non-structural flood management techniques in the watershed. Protecting, acquiring and managing ecosystems in buffer zones along rivers, lakes, reservoirs and coasts can be cost-effective measures for flood control and water quality management.
    • Implement green infrastructure on site and in municipalities
      Green infrastructure can help reduce runoff and stormwater flows that may otherwise exceed system capacity. Examples of green infrastructure include: bio-retention areas (rain gardens), low impact development methods, green roofs, swales (depressions to capture water) and the use of vegetation or pervious materials instead of impervious surfaces.
    • Integrate flood management and modeling into land use planning
      It is critical that future water utility infrastructure be planned and built in consideration of future flood risks. Infrastructure can be built in areas that do not have a high risk of future flooding. Alternately, appropriate flood management plans can be implemented that involve 'soft' adaptation measures such as conserving natural ecosystems or 'hard' measures such as dikes and flood walls.
  • Monitor Operational Capabilities
    • Monitor current weather conditions
      A better understanding of weather conditions provides a utility with the ability to recognize possible changes in climate change and then identify the subsequent need to alter current operations to ensure resilient supply and services. Observations of precipitation, temperature and storm events are particularly important for improving models of projected water quality and quantity.
    • Monitor flood events and drivers
      Understanding and modeling the conditions that result in flooding is an important part of projecting how climate change may drive change in future flood occurrence. Monitoring data for sea level, precipitation, temperature and runoff can be incorporated into flood models to improve predictions. Current flood magnitude and frequency of storm events represents a baseline for considering potential future flood conditions.
  • Plan for Climate ChangeCase study available
  • Repair and Retrofit FacilitiesCase study available
    • Implement policies and procedures for post-flood and/or post-fire repairs
      Post-disaster policies should minimize service disruption due to damaged infrastructure. These contingency plans should be incorporated into other planning efforts and updated regularly to remain consistent with any changes in utility services or assets.
    • Improve pumps for backflow prevention
      Sea-level rise and coastal storm surge can cause wastewater outlets to backflow. To prevent this, stronger pumps may be necessary.
    • Increase capacity for wastewater and stormwater collection and treatment
      Precipitation variability will increase in many areas. Even in areas where precipitation and runoff may decrease on average, the distribution of rainfall patterns (i.e., intensity and duration) can change in ways that impact water infrastructure. In particular, more extreme storms may overwhelm combined wastewater and stormwater systems.
    • Increase treatment capabilities
      Existing water treatment systems may be inadequate to process water of significantly reduced quality. Significant improvement to existing treatment processes or implementation of additional treatment technologies may be necessary to ensure that quality of water supply (or effluent) continues to meet standards as climate change impacts source or receiving water quality.

Source Water Quality

  • Overall Source Water QualityCase study available
    • Develop models to understand potential water quality changes
      In many areas, increased water temperatures will cause eutrophication and excess algal growth, which will reduce drinking water quality. The quality of drinking water sources may also be compromised by increased sediment or nutrient inputs due to extreme storm events. These impacts may be addressed with targeted watershed management plans.
    • Diversify options for water supply and expand current sources
      Diversifying sources helps to reduce the risk that water supply will fall below water demand. Examples of diversified source water portfolios include using a varying mix of surface water and groundwater, employing desalination when the need arises and establishing water trading with other utilities in times of water shortages or service disruption.
    • Implement saltwater intrusion barriers and aquifer recharge
      As sea level rises, saltwater may intrude into coastal aquifers, resulting in substantially higher treatment costs. The injection of fresh water into aquifers can help to act as a barrier, while intrusion recharges groundwater resources.
    • Increase treatment capabilities
      Existing water treatment systems may be inadequate to process water of significantly reduced quality. Significant improvement to existing treatment processes or implementation of additional treatment technologies may be necessary to ensure that quality of water supply (or effluent) continues to meet standards as climate change impacts source or receiving water quality.
    • Increase water storage capacity
      Increased drought can reduce the safe yield of reservoirs. To reduce this risk, increases in available storage can be made. Methods for accomplishing this may include raising a dam, practicing aquifer storage and recovery, removing accumulated sediment in reservoirs or lowering water intake elevation.
    • Install effluent cooling systems
      Higher surface temperatures may make meeting water quality standards and temperature criteria more difficult. Therefore, to reduce the temperature of treated wastewater discharges, additional effluent cooling systems may be needed.
    • Install low-head dam for saltwater wedge and freshwater pool separation
      Rising sea levels, combined with reductions in freshwater runoff due to drought, will cause the salt water-freshwater boundary to move further upstream in tidal estuaries. Upstream shifts of this boundary can reduce the water quality of surface water resources. Installation of low-head dams across tidal estuaries can prevent this upstream movement.
    • Manage reservoir water quality
      Changes in precipitation and runoff timing, coupled with higher temperatures due to climate change, may lead to diminished reservoir water quality. Reservoir water quality can be maintained or improved by a combination of watershed management, to reduce pollutant runoff and promote groundwater recharge and reservoir management methods, such as lake aeration.
    • Model and monitor groundwater conditions
      Understanding and modeling groundwater conditions will inform aquifer management and projected water quantity and quality changes. Monitoring data for aquifer water level, changes in chemistry and detection of saltwater intrusion can be incorporated into models to predict future supply. Climate change may lead to diminished groundwater recharge in some areas because of reduced precipitation and decreased runoff.
    • Monitor surface water conditions
      Understanding surface water conditions and the factors that alter quantity and quality is an important part of projecting how climate change may impact water resources. Monitoring data for discharge, snowmelt, reservoir or stream level, upstream runoff, streamflow, in-stream temperature and overall water quality can be incorporated into models of projected supply or receiving water quality.
    • Retrofit intakes to accommodate lower flow or water levels
      In areas where streamflow declines due to climate change, water levels may fall below intakes for water treatment plants.
  • Saltwater IntrusionCase study available
    • Diversify options for water supply and expand current sources
      Diversifying sources helps to reduce the risk that water supply will fall below water demand. Examples of diversified source water portfolios include using a varying mix of surface water and groundwater, employing desalination when the need arises and establishing water trading with other utilities in times of water shortages or service disruption.
    • Implement saltwater intrusion barriers and aquifer recharge
      As sea level rises, saltwater may intrude into coastal aquifers, resulting in substantially higher treatment costs. The injection of fresh water into aquifers can help to act as a barrier, while intrusion recharges groundwater resources.
    • Increase treatment capabilities
      Existing water treatment systems may be inadequate to process water of significantly reduced quality. Significant improvement to existing treatment processes or implementation of additional treatment technologies may be necessary to ensure that quality of water supply (or effluent) continues to meet standards as climate change impacts source or receiving water quality.
    • Install low-head dam for saltwater wedge and freshwater pool separation
      Rising sea levels, combined with reductions in freshwater runoff due to drought, will cause the salt water-freshwater boundary to move further upstream in tidal estuaries. Upstream shifts of this boundary can reduce the water quality of surface water resources. Installation of low-head dams across tidal estuaries can prevent this upstream movement.
    • Model and monitor groundwater conditions
      Understanding and modeling groundwater conditions will inform aquifer management and projected water quantity and quality changes. Monitoring data for aquifer water level, changes in chemistry and detection of saltwater intrusion can be incorporated into models to predict future supply. Climate change may lead to diminished groundwater recharge in some areas because of reduced precipitation and decreased runoff.
    • Monitor surface water conditions
      Understanding surface water conditions and the factors that alter quantity and quality is an important part of projecting how climate change may impact water resources. Monitoring data for discharge, snowmelt, reservoir or stream level, upstream runoff, streamflow, in-stream temperature and overall water quality can be incorporated into models of projected supply or receiving water quality.
  • Erosion and SedimentationCase study available
    • Increased drought can reduce the safe yield of reservoirs
      To reduce this risk, increases in available storage can be made. Methods for accomplishing this may include raising a dam, practicing aquifer storage and recovery, removing accumulated sediment in reservoirs or lowering water intake elevation.
  • Algal BloomsCase study available
    • Develop models to understand potential water quality changes
      In many areas, increased water temperatures will cause eutrophication and excess algal growth, which will reduce drinking water quality. The quality of drinking water sources may also be compromised by increased sediment or nutrient inputs due to extreme storm events. These impacts may be addressed with targeted watershed management plans.
    • Increase treatment capabilities
      Existing water treatment systems may be inadequate to process water of significantly reduced quality. Significant improvement to existing treatment processes or implementation of additional treatment technologies may be necessary to ensure that quality of water supply (or effluent) continues to meet standards as climate change impacts source or receiving water quality.
    • Manage reservoir water quality
      Changes in precipitation and runoff timing, coupled with higher temperatures due to climate change, may lead to diminished reservoir water quality. Reservoir water quality can be maintained or improved by a combination of watershed management, to reduce pollutant runoff and promote groundwater recharge and reservoir management methods, such as lake aeration.
    • Install effluent cooling systems
      Higher surface temperatures may make meeting water quality standards and temperature criteria more difficult. Therefore, to reduce the temperature of treated wastewater discharges, additional effluent cooling systems may be needed.
    • Retrofit intakes to accommodate lower flow or water levels
      In areas where streamflow declines due to climate change, water levels may fall below intakes for water treatment plants.

Sea Level Rise

  • Construct New InfrastructureCase study available
  • Model Climate RiskCase study available
    • Conduct sea-level rise and storm surge modeling
      Modeling sea-level rise and storm surge dynamics will better inform the placement and protection of critical infrastructure. Generic models have been developed to consider subsidence, global sea-level rise and storm surge effects on inundation, including National Oceanic and Atmospheric Administration's (NOAA) SLOSH (Sea, Lake and Overland Surges from Hurricanes) Model and The Nature Conservancy's Coastal Resilience Tool, amongst others.
    • Model and monitor groundwater conditions
      Understanding and modeling groundwater conditions will inform aquifer management and projected water quantity and quality changes. Monitoring data for aquifer water level, changes in chemistry and detection of saltwater intrusion can be incorporated into models to predict future supply. Climate change may lead to diminished groundwater recharge in some areas because of reduced precipitation and decreased runoff.
    • Model and reduce inflow/infiltration in the sewer system
      More extreme storm events will increase the amount of wet weather infiltration and inflow into sanitary and combined sewers. Sewer models can estimate the impact of those increased wet weather flows on wastewater collection system and treatment plant capacity and operations. Potential system modifications to reduce those impacts include infiltration reduction measures, additional collection system capacity, offline storage or additional peak wet weather treatment capacity.
  • Modify Land Use
    • Study response of nearby wetlands to storm surge events
      Coastal wetlands act as buffers to storm surge. Protecting and understanding the ability of existing wetlands to provide protection for coastal infrastructure in the future is important considering projected sea-level rise and possible changes in storm severity.
  • Monitor Operational Capabilities
    • Monitor flood events and drivers
      Understanding and modeling the conditions that result in flooding is an important part of projecting how climate change may drive change in future flood occurrence. Monitoring data for sea level, precipitation, temperature and runoff can be incorporated into flood models to improve predictions. Current flood magnitude and frequency of storm events represents a baseline for considering potential future flood conditions.
  • Plan for Climate ChangeCase study available
  • Repair and Retrofit FacilitiesCase study available
    • Implement saltwater intrusion barriers and aquifer recharge
      As sea level rises, saltwater may intrude into coastal aquifers, resulting in substantially higher treatment costs. The injection of fresh water into aquifers can help to act as a barrier, while intrusion recharges groundwater resources.
    • Improve pumps for backflow prevention
      Sea-level rise and coastal storm surge can cause wastewater outlets to backflow. To prevent this, stronger pumps may be necessary.

General Utility Preparedness

  • Construct New InfrastructureCase study available
    • Build flood barriers to protect infrastructure
      Flood barriers to protect critical infrastructure include levees, dikes and seawalls. A related strategy is flood proofing, which involves elevating critical equipment or placing it within waterproof containers or foundation systems.
    • Build infrastructure needed for aquifer storage and recovery
      Increasing the amount of groundwater storage available promotes recharge when surface water flows are in excess of demand, thus increasing climate resilience for seasonal or extended periods of drought, and taking advantage of seasonal variations in surface water runoff. Depending on whether natural or artificial aquifer recharge is employed, the required infrastructure may include percolation basins and injection wells.
    • Diversify options for water supply and expand current sources
      Diversifying sources helps to reduce the risk that water supply will fall below water demand. Examples of diversified source water portfolios include using a varying mix of surface water and groundwater, employing desalination when the need arises and establishing water trading with other utilities in times of water shortages or service disruption.
    • Increase water storage capacity
      Increased drought can reduce the safe yield of reservoirs. To reduce this risk, increases in available storage can be made. Methods for accomplishing this may include raising a dam, practicing aquifer storage and recovery, removing accumulated sediment in reservoirs or lowering water intake elevation.
    • Install low-head dam for saltwater wedge and freshwater pool separation
      Rising sea levels, combined with reductions in freshwater runoff due to drought, will cause the salt water-freshwater boundary to move further upstream in tidal estuaries. Upstream shifts of this boundary can reduce the water quality of surface water resources. Installation of low-head dams across tidal estuaries can prevent this upstream movement.
    • Plan and establish alternative or on-site power supply
      Water utilities are one of the major consumers of electricity in the United States. With future electricity demand forecasted to grow, localized energy shortages may occur. The development of "off-grid" sources can be a good hedging strategy for electricity shortfalls. Moreover, redundant power supply can provide resiliency for situations in which natural disasters cause power outages. On-site sources can include solar, wind, inline microturbines and biogas (i.e., methane from wastewater treatment). New and back-up electrical equipment should be located above potential flood levels.
    • Relocate facilities to higher elevations
      Relocating utility infrastructure, such as treatment plants and pump stations, to higher elevations would reduce risks from coastal flooding and exposure as a result of coastal erosion or wetland loss.
  • Increase System EfficiencyCase study available
    • Improve energy efficiency and optimization of operations
      Water utilities are one of the major consumers of electricity in the United States. With future electricity demand forecasted to grow, localized energy shortages may be experienced. Energy efficiency measures will save in energy costs and make utilities less vulnerable to electricity shortfalls due to high demand or service disruptions from natural disasters.
    • Finance and facilitate systems to recycle water
      Recycling greywater frees up more finished water for other uses, expanding supply and decreasing the need to discharge into receiving waters. Receiving water quality limitations may increase due to more frequent droughts. Therefore, to limit wastewater discharges, use of reclaimed water in homes and businesses should be encouraged.
    • Practice conjunctive use
      Conjunctive use involves the coordinated, optimal use of both surface water and groundwater, both intra- and inter-annually. Aquifer storage and recovery is a form of conjunctive use. For example, a utility may store some fraction of surface water flows in aquifers during wet years and withdraw this water during dry years when the river flow is low. Depending on whether natural or artificial aquifer recharge is employed, the required infrastructure may include percolation basins and injection wells.
  • Model Climate RiskCase study available
    • Conduct extreme precipitation events analyses
      An increase in the magnitude or frequency of extreme events can severely challenge water utility systems that were not designed to withstand intense events. Extreme event analyses or modeling can help develop a better understanding of the risks and consequences associated with these types of events.
    • Conduct sea-level rise and storm surge modeling
      Modeling sea-level rise and storm surge dynamics will better inform the placement and protection of critical infrastructure. Generic models have been developed to consider subsidence, global sea-level rise and storm surge effects on inundation, including National Oceanic and Atmospheric Administration's (NOAA) SLOSH (Sea, Lake and Overland Surges from Hurricanes) Model and The Nature Conservancy's Coastal Resilience Tool, amongst others.
    • Develop models to understand potential water quality changes
      In many areas, increased water temperatures will cause eutrophication and excess algal growth, which will reduce drinking water quality. The quality of drinking water sources may also be compromised by increased sediment or nutrient inputs due to extreme storm events. These impacts may be addressed with targeted watershed management plans.
    • Model and monitor groundwater conditions
      Understanding and modeling groundwater conditions will inform aquifer management and projected water quantity and quality changes. Monitoring data for aquifer water level, changes in chemistry and detection of saltwater intrusion can be incorporated into models to predict future supply. Climate change may lead to diminished groundwater recharge in some areas because of reduced precipitation and decreased runoff.
    • Model and reduce inflow/infiltration in the sewer system
      More extreme storm events will increase the amount of wet weather infiltration and inflow into sanitary and combined sewers. Sewer models can estimate the impact of those increased wet weather flows on wastewater collection system and treatment plant capacity and operations. Potential system modifications to reduce those impacts include infiltration reduction measures, additional collection system capacity, offline storage or additional peak wet weather treatment capacity.
    • Use hydrologic models to project runoff and future water supply
      In order to understand how climate change may impact future water supply and water quality, hydrologic models, coupled with projections from climate models, must be developed. It is important to work towards an understanding of how both the mean and temporal (seasonal) distribution of surface water flows may change. Groundwater recharge, snowpack and the timing of snowmelt are critical areas that may be severely impacted by climate change and should be incorporated into the analysis.
  • Modify Land UseCase study available
    • Acquire and manage ecosystems
      Intact natural ecosystems have many benefits for utilities: reducing sediment and nutrient inputs into source water bodies, regulating runoff and streamflow, buffering against flooding and reducing storm surge impacts and inundation on the coasts (e.g., mangroves, saltwater marshes, wetlands). Utilities can also work with regional floodplain managers and appropriate stakeholders to explore non-structural flood management techniques in the watershed. Protecting, acquiring and managing ecosystems in buffer zones along rivers, lakes, reservoirs and coasts can be cost-effective measures for flood control and water quality management.
    • Implement green infrastructure on site and in municipalities
      Green infrastructure can help reduce runoff and stormwater flows that may otherwise exceed system capacity. Examples of green infrastructure include: bio-retention areas (rain gardens), low impact development methods, green roofs, swales (depressions to capture water) and the use of vegetation or pervious materials instead of impervious surfaces.
    • Implement watershed management
      Watershed management includes a range of policy and technical measures. These generally focus on preserving or restoring vegetated land cover in a watershed and managing stormwater runoff. These changes help mimic natural watershed hydrology, increasing groundwater recharge, reducing runoff and improving the quality of runoff.
    • Integrate flood management and modeling into land use planning
      It is critical that future water utility infrastructure be planned and built in consideration of future flood risks. Infrastructure can be built in areas that do not have a high risk of future flooding. Alternately, appropriate flood management plans can be implemented that involve 'soft' adaptation measures such as conserving natural ecosystems or 'hard' measures such as dikes and flood walls.
    • Study response of nearby wetlands to storm surge events
      Coastal wetlands act as buffers to storm surge. Protecting and understanding the ability of existing wetlands to provide protection for coastal infrastructure in the future is important considering projected sea-level rise and possible changes in storm severity.
    • Update fire models and practice fire management plans
      Fire frequency and severity may change in the future, therefore it is important to develop, practice and regularly update management plans to reduce fire risk. Controlled burns, thinning and weed and invasive plant control help to reduce risk in wildfire-prone areas.
  • Modify Water Demand
    • Encourage and support practices to reduce water use at local power plants
      The electricity sector, when compared with other sectors, withdraws the greatest amount of water in the United States. Any efforts to reduce water usage by utilities will increase available water supply. For example, utilities may provide reclaimed water to electric utilities for electricity generation, use closed-loop water circulation systems, or use dry cooling for the turbines.
    • Model and reduce agricultural and irrigation water demand
      Agriculture represents the second largest user of water in the United States in terms of withdrawals. In order to forecast and plan for future water supply needs, agricultural (irrigation) demand must be projected, particularly in drought-prone areas. For example, to reduce agricultural water demand, utilities can work with farmers to adopt advanced micro-irrigation technology (e.g., drip irrigation).
    • Model future regional electricity demand
      The electricity sector represents the largest user of water in the United States in terms of withdrawals. In order to forecast future water supply needs, changes in electricity demand related to climate change must be projected.
    • Practice water conservation and demand management
      An effective and low-cost method of meeting increased water supply needs is to implement water conservation programs that will cut down on waste and inefficiencies. Public outreach is an essential component of any water conservation program. Outreach communications typically include: basic information on household water usage, the best time of day to undertake water-intensive activities and information on and access to water efficient household appliances such as low-flow toilets, showerheads and front-loading washers. Education and outreach can also be targeted to different sectors (i.e., commercial, institutional, industrial, public sectors). Effective conservation programs in the community include those that provide rebates or help install water meters, water-conserving appliances, toilets and rainwater harvesting tanks.
  • Monitor Operational CapabilitiesCase study available
    • Conduct stress testing on wastewater treatment biological systems to assess tolerance to heat
      Increased surface water temperature may require changes to wastewater treatment systems, as microbial species used may react differently in warmer environments. Stress testing involves subjecting biological systems or bench-top simulations of systems to elevated temperatures and monitoring the impacts on treatment processes.
    • Manage reservoir water quality
      Changes in precipitation and runoff timing, coupled with higher temperatures due to climate change, may lead to diminished reservoir water quality. Reservoir water quality can be maintained or improved by a combination of watershed management, to reduce pollutant runoff and promote groundwater recharge and reservoir management methods, such as lake aeration.
    • Monitor and inspect the integrity of existing infrastructure
      Monitoring is a critical component of establishing a measure of current conditions, detecting deterioration in physical assets and evaluating when the necessary adjustments need to be made to prolong infrastructure lifespan.
    • Monitor current weather conditions
      A better understanding of weather conditions provides a utility with the ability to recognize possible changes in climate change and then identify the subsequent need to alter current operations to ensure resilient supply and services. Observations of precipitation, temperature and storm events are particularly important for improving models of projected water quality and quantity.
    • Monitor flood events and drivers
      Understanding and modeling the conditions that result in flooding is an important part of projecting how climate change may drive change in future flood occurrence. Monitoring data for sea level, precipitation, temperature and runoff can be incorporated into flood models to improve predictions. Current flood magnitude and frequency of storm events represents a baseline for considering potential future flood conditions.
    • Monitor surface water conditions
      Understanding surface water conditions and the factors that alter quantity and quality is an important part of projecting how climate change may impact water resources. Monitoring data for discharge, snowmelt, reservoir or stream level, upstream runoff, streamflow, in-stream temperature and overall water quality can be incorporated into models of projected supply or receiving water quality.
    • Monitor vegetation changes in watersheds
      Changes in vegetation alter the runoff that enters surface water bodies and the risk of wildfire to facilities within the watershed. Monitoring vegetation changes can be conducted by ground cover surveys, aerial photography or by relying on the research from local conservation groups and universities.
  • Plan for Climate ChangeCase study available
    • Adopt insurance mechanisms and other financial instruments
      Adequate insurance can insulate utilities from financial losses due to extreme weather events, helping to maintain financial sustainability of utility operations.
    • Conduct climate change impacts and adaptation training
      An important step in developing an adaptation program is educating staff on climate change. Staff should have a basic understanding of the projected range of changes in temperature and precipitation, the increase in the frequency and magnitude of extreme weather events for their region and how these changes may affect the utility's assets and operations. Preparedness from this training can improve utility management under current climate conditions as well.
    • Develop coastal restoration plans
      Coastal restoration plans may protect water utility infrastructure from damaging storm surge by increasing protective habitat of coastal ecosystems such as mangroves and wetlands. Restoration plans should consider the impacts of sea-level rise and development on future ecosystem distribution. Successful strategies may also consider rolling easements and other measures identified by EPA's Climate Ready Estuaries program.
    • Develop emergency response plans
      Emergency response plans (ERPs) outline activities and procedures for utilities to follow in case of an incident, from preparation to recovery. Some of the extreme events considered in ERPs may change in their frequency or magnitude due to changes in climate, which may require making changes to these plans to capture a wider range of possible events.
    • Develop energy management plans for key facilities
      Energy management plans identify the most critical systems in a facility, provide backup power sources for those systems and evaluate options to reduce power consumption by upgrading to more efficient equipment. Utilities may develop plans to produce energy, reduce use and work toward net-zero goals.
    • Establish mutual aid agreements with neighboring utilities
      Beyond the establishment of water trading in times of water shortages or service disruptions, these agreements involve the sharing of personnel and resources in times of emergency (e.g., natural disasters).
    • Identify and protect vulnerable facilities
      Operational measures to isolate and protect the most vulnerable systems or assets at a utility should be considered. For example, critical pump stations would include those serving a large population and those located in a flood zone. Protection of these assets would then be prioritized based on the likelihood of flood damage and the consequence of service disruption.
    • Integrate climate-related risks into capital improvement plans
      Plans to build or expand infrastructure should consider the vulnerability of the proposed locations to inland flooding, sea-level rise, storm surge and other impacts associated with climate change.
    • Participate in community planning and regional collaborations
      Effective adaptation planning requires the cooperation and involvement of the community. Water utilities will benefit by engaging in climate change planning efforts with local and regional governments, electric utilities and other local organizations.
    • Update drought contingency plans
      Drought leads to severe pressures on water supply. Drought contingency plans would include the use of alternate water supplies and the adoption of water use restrictions for households, businesses and other water users. These plans should be updated regularly to remain consistent with current operations and assets.
  • Repair and Retrofit FacilitiesCase study available
    • Implement policies and procedures for post-flood and/or post-fire repairs
      Post-disaster policies should minimize service disruption due to damaged infrastructure. These contingency plans should be incorporated into other planning efforts and updated regularly to remain consistent with any changes in utility services or assets.
    • Implement saltwater intrusion barriers and aquifer recharge
      As sea level rises, saltwater may intrude into coastal aquifers, resulting in substantially higher treatment costs. The injection of fresh water into aquifers can help to act as a barrier, while intrusion recharges groundwater resources.
    • Improve pumps for backflow prevention
      Sea-level rise and coastal storm surge can cause wastewater outlets to backflow. To prevent this, stronger pumps may be necessary.
    • Increase capacity for wastewater and stormwater collection and treatment
      Precipitation variability will increase in many areas. Even in areas where precipitation and runoff may decrease on average, the distribution of rainfall patterns (i.e., intensity and duration) can change in ways that impact water infrastructure. In particular, more extreme storms may overwhelm combined wastewater and stormwater systems.
    • Increase treatment capabilities
      Existing water treatment systems may be inadequate to process water of significantly reduced quality. Significant improvement to existing treatment processes or implementation of additional treatment technologies may be necessary to ensure that quality of water supply (or effluent) continues to meet standards as climate change impacts source or receiving water quality.
    • Install effluent cooling systems
      Higher surface temperatures may make meeting water quality standards and temperature criteria more difficult. Therefore, to reduce the temperature of treated wastewater discharges, additional effluent cooling systems may be needed.
    • Retrofit intakes to accommodate lower flow or water levels
      In areas where streamflow declines due to climate change, water levels may fall below intakes for water treatment plants.

Top of Page


Source Documents

These strategies are adapted from existing EPA, CDC and other federal resources. Please view these strategies in the context provided by the primary source document:

Top of Page


Disclaimer

The adaptation strategies provided are intended to inform and assist communities in identifying potential alternatives. They are illustrative and are presented to help communities consider possible ways to address anticipated current and future climate threats to contaminated site management. Read the full disclaimer.

Top of Page