Reporting, Forms and Instructions Home
Reporting Monitoring Results
Reporting your monitoring results to Region 8 EPA is an important part of complying with drinking water program regulations. Your system's monitoring and reporting requirement for each contaminant is based on the size and type of population served by your system, whether the water treated is surface water, ground water under the influence or ground water, the treatment processes you use, past sampling results for the contaminant, and whether your system has received a variance or waiver for monitoring.
Our office notifies your system early each year of your system's monitoring and reporting requirements. If these requirements change during the year, you will receive written notification from our office. Usually, changes during the year pertain to an increase or decrease in the frequency of monitoring required, based on previous monitoring results. You can also find your system's sampling requirements for individual microbiological, physical, and chemical components at the online Drinking Water Watch.
You may be required to take samples at the sites at which you intake water, during treatment, and at designated points in the distribution system. If you purchase your water, you are still required to sample and report for biological and chemical components in the distribution system.
Many of these samples must be analyzed at laboratories certified to analyze for the particular biological or chemical components for which you are sampling (e.g. nitrates, volatile organic compounds). You may make arrangements for the laboratory to send copies of the results directly to our office. However, your system is legally responsible for ensuring that our office receives these results and by the mandated deadlines. You should maintain copies of all laboratory results at your system.
If your system disinfects with chlorine, we recommend that you record those chlorine sample results taken in the distribution system on the paperwork you send with your total coliform samples. The laboratory can report these results for you. If your system treats surface water, you will also be required to test for chlorine at the entry point to the distribution system. These results are reported on a form provided by our office.
Please note that all Wyoming systems are waived from monitoring four synthetic organic chemicals: diquat, endothall, glyphosate and dioxin. This waiver was given in 1997 after sampling throughout Wyoming showed that these chemicals were not present in drinking water sources.
Many systems have been individually waived from testing asbestos because their distribution systems do not contain asbestos-cement pipe. Check your Annual Monitoring and Reporting Schedule for mention of variances or waivers. We mail this schedule to your system's administrative contact early each year.
Reporting forms and instruction sheets are provided for your use on the Reporting Forms page in this website. We provide these forms in PDF format and also in Excel and Word format so you can use imbedded formulae (Excel) or fill in the blanks (Word).
After registering and logging into Drinking Water Watch, you may subscribe to receive email reminders to take samples, so you can be sure to report on time.
Reporting to Your Consumers
You are required to notify the persons who consume the water you provide regarding water quality. If your system violates one or more maximum contaminant levels or treatment technique requirements, you are required to issue a public notification to your consumers. Our Public Notification page provides more detail about requirements and points you to useful guidance.
If your public water supply system is a community system, you are required to prepare and distribute a Consumer Confidence Report to your system's customers each year. You must also provide our office with a copy of the report and certify that it has been prepared and distributed appropriately. You will find more information on our Consumer Confidence Report page.
You are required to keep certain records regarding sampling and monitoring, violations, sanitary surveys, public notices and reports, and operation of your system. Record Keeping Rules: A Quick Reference Guide provides instructions on what to keep and for how long.