Effluent Guidelines

Iron and Steel Manufacturing Effluent Guidelines

Photo of a steel millEPA promulgated the Iron and Steel (I&S) Effluent Guidelines and Standards (40 CFR Part 420) in 1974, and amended the regulation in 1976, 1982, 1984, 2002 and 2005. The regulation covers any facility that is engaged in iron or steel manufacturing, forming, and finishing, including coke manufacturing. EPA estimates there are 254 iron and steel facilities discharging directly to surface waters or indirectly through publicly owned treatment works (POTWs).

The I&S Effluent Guidelines and Standards are incorporated into NPDES permits for direct dischargers or permits or other control mechanisms for indirect dischargers (see Pretreatment Program).

On this page:

What is the Iron and Steel Industry?

Iron and steel manufacturing processes include cokemaking, sintering, briquetting, ironmaking (including direct-reduced ironmaking), steelmaking, vacuum degassing, ladle metallurgy, casting, hot forming, forging, and finishing (e.g., acid pickling, descaling, cold forming, surface cleaning, hot coating and annealing).

Facilities Covered

The I&S regulation applies to facilities organized into 13 subcategories:
  1. Cokemaking
  2. Sintering
  3. Ironmaking
  4. Steelmaking
  5. Vacuum Degassing
  6. Continuous Casting
  7. Hot Forming
  1. Salt Bath Descaling
  2. Acid Pickling
  3. Cold Forming
  4. Alkaline Cleaning
  5. Hot Coating
  6. Other Operations
    (direct-reduced iron production, briquetting, forging)
 
These activities are included within the following NAICS groups:
  • 3311: Iron and Steel Mills and Ferroalloy Manufacturing
  • 3312: Steel Product Manufacturing from Purchased Steel

Note: the NAICS group listings are provided as a guide and do not define the coverage of the I&S category. For precise definitions of coverage, see the applicability sections in 40 CFR Part 420.


Rulemaking History

2005 Amendment

You will need Adobe Reader to view some of the files on this page. See EPA’s About PDF page to learn more.EPA restored the provision that allows the use of alternative oil and grease limitations in NPDES permits (known as the “water bubble”) and corrected errors in the effective dates of NSPS

2002 Amendment

Revised Subparts A, B and D, and added Subpart M. Also deleted provisions covering obsolete operations: beehive coke ovens, ferromanganese blast furnaces, and open hearth furnace steelmaking.

1984 Amendment

Revisions pursuant to settlement agreement
  • Documents, including:
    • Final Rule: 49 FR 21024, 5/17/1984
    • Proposed Rule: 48 FR 46944, 10/14/1983
    • Final and Interim Final Rule: 48 FR 46942, 10/14/1983

1982 Amendment

Revised BPT, BAT, PSES, PSNS, and NSPS; and adopted an alternate effluent limitations policy ("water bubble")

1976 Amendment

Established BPT for steel forming and finishing operations within the iron and steel industry

1974 Initial Rulemaking

Established BPT and BAT, NSPS, and PSNS for the basic steelmaking operations within the integrated steel industry
  • Documents, including:
    • Final Rule: 39 FR 24114, 6/28/1974
    • Proposed Rule: 39 FR 6484, 2/19/1974

Additional Information

For additional information regarding Iron and Steel Effluent Guidelines, please contact Ahmar Siddiqui, siddiqui.ahmar@epa.gov or 202-566-1044.

Top of Page