Superfund

Superfund Cleanup Process

Cleaning up Superfund sites is a complex, multi-phase process. The contents of this page are provided for learning how the cleanup process works and to find opportunities for community involvement. Click links at each phase of the process for more information.

  Superfund Cleanup Process
Chemical drums at a newly discovered potential NPL site

Preliminary Assessment/Site Investigation (Site Assessment)

This stage includes a review of historical information and includes visiting a site to evaluate the potential for a release of hazardous substances. EPA determines if the site poses a threat to people and the environment and whether hazards need to be addressed immediately or additional site information will be collected.

Warning sign posted at a site recently listed on the NPL.

National Priorities List (NPL) Site Listing Process

The NPL is primarily an information resource that identifies sites that warrant cleanup. It is a list of the worst hazardous waste sites identified by Superfund. The list is largely based on the score a site receives from the Hazard Ranking System.

Field crew collecting soil samples to analyze as part of RI/FS field sampling activities.

Remedial Investigation/Feasibility Study (Site Characterization)

This stage involves an evaluation of the nature and extent of contamination at a site and assessing potential threats to human health and the environment. This stage of the process also includes evaluation of the potential performance and cost of the treatment options identified for a site.

Final Record of Decision document detailing the approach used to clean up a Superfund site.

Records of Decision (Remedy Decisions)

An official record of the cleanup alternatives that used to clean up a superfund site. Leading up to the ROD, EPA selects a preferred remedy and presents the cleanup plan in a document called a Proposed Plan.

Soil excavation and cleanup at a Superfund site

Remedial Design/Remedial Action

Detailed cleanup plans are developed and implemented during the remedial design/remedial action (RD/RA) stage. Remedial design includes development of engineering drawings and specifications for a site cleanup. Remedial action follows design, and involves the actual construction or implementation phase of site cleanup.

Reseeded landfill cap after site cleanup activities have been completed.

Construction Completion

This phase of the process communicates a cleanup milestone for NPL sites, specifically that physical cleanup activities at a site have been completed and that a site qualifies for deletion from the NPL.

Groundwater pump and treat station at a site where physical cleanup activities have been completed

Post Construction Completion

Activities undertaken during this phase help ensure that cleanup work at a site continues to protect human health and the environment. Work can include: routine monitoring of a site; routine reviews of the site to ensure cleanup continues to be effective; and enforcing any long term site restrictions (e.g., institutional controls)

EPA deletion notice published in the Federal Register.

National Priorities List Deletion

Once cleanup goals have been achieved and sites are fully protective of human health and the environment, EPA deletes them from the NPL.

A former Superfund site is now a man-made lake surrounded by natural and recreational amenities.

Site Reuse/Redevelopment

EPA's goal is to make sure site cleanup is consistent with the likely future use of a site. Consideration of reuse at a site can occur at any point in the Superfund cleanup process, from site investigation activities to deletion from the NPL. EPA works with communities to make sure sites or portions of sites are used safely.